|By Greg Schulz||
|November 26, 2012 12:00 PM EST||
Recently I was in Europe for a couple of weeks including stops at Storage Networking World (SNW) Europe in Frankfurt, StorageExpo Holland, Ceph Day in Amsterdam (object and cloud storage), and Nijkerk where I delivered two separate 2 day, and a single 1 day seminar.
At the recent StorageExpo Holland event in Utrecht, I gave a couple of presentations, one on cloud, virtualization and storage networking trends, the other taking a deeper look at Solid State Devices (SSD's). As in the past, StorageExpo Holland was great in a fantastic venue, with many large exhibits and great attendance which I heard was over 6,000 people over two days (excluding exhibitor vendors, vars, analysts, press and bloggers) which was several times larger than what was seen in Frankfurt at the SNW event.
Both presentations were very well attended and included lively interactive discussion during and after the sessions. The theme of my second talk was SSD, the question is not if, rather what to use where, how and when which brings us up to this post.
For those who have been around or using SSD for more than a decade outside of cell phones, camera, SD cards or USB thumb drives, that probably means DRAM based with some form of data persistency mechanisms. More recently mention SSD and that implies nand flash-based, either MLC or eMLC or SLC or perhaps emerging mram or PCM. Some might even think of NVRAM or other forms of SSD including emerging mram or mem-resistors among others, however lets stick to nand flash and dram for now.
Often in technology what is old can be new, what is new can be seen as old, if you have seen, experienced or done something before you will have a sense of DejaVu and it might be evolutionary. On the other hand, if you have not seen, heard, experienced, or found a new audience, then it can be revolutionary or maybe even an industry first ;).
Technology evolves, gets improved on, matures, and can often go in cycles of adoption, deployment, refinement, retirement, and so forth. SSD in general has been an on again, off again type cycle technology for the past several decades except for the past six to seven years. Normally there is an up cycle tied to different events, servers not being fast enough or affordable so use SSD to help address performance woes, or drives and storage systems not being fast enough and so forth.
Btw, for those of you who think that the current SSD focused technology (nand flash) is new, it is in fact 25 years old and still evolving and far from reaching its full potential in terms of customer deployment opportunities.
Nand flash memory has helped keep SSD practical for the past several years riding the similar curve that is keeping hard disk drives (HDD's) that they were supposed to replace alive. That is improved reliability, endurance or duty cycle, better annual failure rate (AFR), larger space capacity, lower cost, and enhanced interfaces, packaging, power and functionality.
DRAM historically at least for enterprise has been the main option for SSD based solutions using some form of data persistency. Data persistency options include battery backup combined with internal HDD's to de stage information from the DRAM before power was lost. TMS (recently bought by IBM) was one of the early SSD vendors from the DRAM era that made the transition to flash including being one of the first many years ago to combine DRAM as a cache layer over nand flash as a persistency or de-stage layer. This would be an example of if you were not familiar with TMS back then and their capacities, you might think or believe that some more recent introductions are new and revolutionary, and perhaps they are in their own right or with enough caveats and qualifiers.
An emerging trend, which for some will be Dejavu, is that of using more DRAM in combination with nand flash SSD.
Oracle is one example of a vendor who IMHO rather quietly (intentionally or accidentally) has done this in the 7000 series storage systems as well as ExaData based database storage systems. Rest assured they are not alone and in fact many of the legacy large storage vendors have also piled up large amounts of DRAM based cache in their storage systems. For example EMC with 2TByte of DRAM cache in their VMAX 40K, or similar systems from Fujitsu HP, HDS, IBM and NetApp (including recent acquisition of DRAM based CacheIQ) among others. This has also prompted the question of if SSD has been successful in traditional storage arrays, systems or appliances as some would have you believe not, click here to learn more and cast your vote.
So is the future in the past? Some would say no, some will say yes, however IMHO there are lessons to learn and leverage from the past while looking and moving forward.
Early SSD's were essentially RAM disks, that is a portion of main random access memory (RAM) or what we now call DRAM set aside as a non persistent (unless battery backed up) cache or device. Using a device driver, applications could use the RAM disk as though it were a normal storage system. Different vendors springing up with drivers for various platforms and disappeared as their need were reduced with faster storage systems, interfaces and ram disks drives supplied by vendors, not to mention SSD devices.
Oh, for you tech trivia types, there was also database machines from the late 80s such as Briton Lee that would offload your database processing functions to a specialized appliance. Sound like Oracle ExaData I, II or III to anybody?
Ok, so we have seen this movie before, no worries, old movies or shows get remade, and unless you are nostalgic or cling to the past, sure some of the remakes are duds, however many can be quite good.
Same goes with the remake of some of what we are seeing now. Sure there is a generation that does not know nor care about the past, its full speed ahead and leverage what will get them there.
Thus we are seeing in memory databases again, some of you may remember the original series (pick your generation, platform, tool and technology) with each variation getting better. With 64 bit processor, 128 bit and beyond file system and addressing, not to mention ability for more DRAM to be accessed directly, or via memory address extension, combined with memory data footprint reduction or compression, there is more space to put things (e.g. no such thing as a data or information recession).
Lets also keep in mind that the best IO is the IO that you do not have to do, and that SSD which is an extension of the memory map plays by the same rules of real estate. That is location matters.
Thus, here we go again for some of you (DejaVu), while for others get ready for a new and exciting ride (new and revolutionary). We are back to the future with in memory database which while for a time will take some pressure from underlying IO systems until they once again out grow server memory addressing limits (or IT budgets).
However for those who do not fall into a false sense of security, no fear, as there is no such thing as a data or information recession. Sure as the sun rises in the east and sets in the west, sooner or later those IO's that were or are being kept in memory will need to be de-staged to persistent storage, either nand flash SSD, HDD or somewhere down the road PCM, mram and more.
There is another trend that with more IOs being cached, reads are moving to where they should resolve which is closer to the application or via higher up in the memory and IO pyramid or hierarchy (shown above).
Thus, we could see a shift over time to more writes and ugly IOs being sent down to the storage systems. Keep in mind that any cache historically provides temporal relieve, question is how long of a temporal relief or until the next new and revolutionary or DejaVu technology shows up.
Ok, nuff said (for now).
All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2012 StorageIO All Rights Reserved
Between the compelling mockups and specs produced by analysts, and resulting applications built by developers, there exists a gulf where projects fail, costs spiral, and applications disappoint. Methodologies like Agile attempt to address this with intensified communication, with partial success but many limitations. In his session at DevOps Summit, Charles Kendrick, CTO and Chief Architect at Isomorphic Software, will present a revolutionary model enabled by new technologies. Learn how busine...
Oct. 9, 2015 02:00 AM EDT Reads: 279
Interested in leveraging automation technologies and a cloud architecture to make developers more productive? Learn how PaaS can benefit your organization to help you streamline your application development, allow you to use existing infrastructure and improve operational efficiencies. Begin charting your path to PaaS with OpenShift Enterprise.
Oct. 9, 2015 02:00 AM EDT Reads: 552
The buzz continues for cloud, data analytics and the Internet of Things (IoT) and their collective impact across all industries. But a new conversation is emerging - how do companies use industry disruption and technology enablers to lead in markets undergoing change, uncertainty and ambiguity? Organizations of all sizes need to evolve and transform, often under massive pressure, as industry lines blur and merge and traditional business models are assaulted and turned upside down. In this new da...
Oct. 9, 2015 02:00 AM EDT Reads: 278
Internet of Things (IoT) will be a hybrid ecosystem of diverse devices and sensors collaborating with operational and enterprise systems to create the next big application. In their session at @ThingsExpo, Bramh Gupta, founder and CEO of robomq.io, and Fred Yatzeck, principal architect leading product development at robomq.io, discussed how choosing the right middleware and integration strategy from the get-go will enable IoT solution developers to adapt and grow with the industry, while at th...
Oct. 9, 2015 02:00 AM EDT Reads: 2,192
Overgrown applications have given way to modular applications, driven by the need to break larger problems into smaller problems. Similarly large monolithic development processes have been forced to be broken into smaller agile development cycles. Looking at trends in software development, microservices architectures meet the same demands. Additional benefits of microservices architectures are compartmentalization and a limited impact of service failure versus a complete software malfunction....
Oct. 9, 2015 02:00 AM EDT Reads: 211
Data loss happens, even in the cloud. In fact, if your company has adopted a cloud application in the past three years, data loss has probably happened, whether you know it or not. In his session at 17th Cloud Expo, Bryan Forrester, Senior Vice President of Sales at eFolder, will present how common and costly cloud application data loss is and what measures you can take to protect your organization from data loss.
Oct. 9, 2015 02:00 AM EDT Reads: 570
The Internet of Things (IoT) is growing rapidly by extending current technologies, products and networks. By 2020, Cisco estimates there will be 50 billion connected devices. Gartner has forecast revenues of over $300 billion, just to IoT suppliers. Now is the time to figure out how you’ll make money – not just create innovative products. With hundreds of new products and companies jumping into the IoT fray every month, there’s no shortage of innovation. Despite this, McKinsey/VisionMobile data...
Oct. 9, 2015 02:00 AM EDT Reads: 202
The web app is agile. The REST API is agile. The testing and planning are agile. But alas, data infrastructures certainly are not. Once an application matures, changing the shape or indexing scheme of data often forces at best a top down planning exercise and at worst includes schema changes that force downtime. The time has come for a new approach that fundamentally advances the agility of distributed data infrastructures. Come learn about a new solution to the problems faced by software organ...
Oct. 9, 2015 02:00 AM EDT Reads: 875
“In the past year we've seen a lot of stabilization of WebRTC. You can now use it in production with a far greater degree of certainty. A lot of the real developments in the past year have been in things like the data channel, which will enable a whole new type of application," explained Peter Dunkley, Technical Director at Acision, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Oct. 9, 2015 01:45 AM EDT Reads: 7,009
There are many considerations when moving applications from on-premise to cloud. It is critical to understand the benefits and also challenges of this migration. A successful migration will result in lower Total Cost of Ownership, yet offer the same or higher level of robustness. Migration to cloud shifts computing resources from your data center, which can yield significant advantages provided that the cloud vendor an offer enterprise-grade quality for your application.
Oct. 9, 2015 12:30 AM EDT Reads: 244
JFrog has announced a powerful technology for managing software packages from development into production. JFrog Artifactory 4 represents disruptive innovation in its groundbreaking ability to help development and DevOps teams deliver increasingly complex solutions on ever-shorter deadlines across multiple platforms JFrog Artifactory 4 establishes a new category – the Universal Artifact Repository – that reflects JFrog's unique commitment to enable faster software releases through the first pla...
Oct. 9, 2015 12:30 AM EDT Reads: 631
IT data is typically silo'd by the various tools in place. Unifying all the log, metric and event data in one analytics platform stops finger pointing and provides the end-to-end correlation. Logs, metrics and custom event data can be joined to tell the holistic story of your software and operations. For example, users can correlate code deploys to system performance to application error codes.
Oct. 9, 2015 12:00 AM EDT Reads: 219
Through WebRTC, audio and video communications are being embedded more easily than ever into applications, helping carriers, enterprises and independent software vendors deliver greater functionality to their end users. With today’s business world increasingly focused on outcomes, users’ growing calls for ease of use, and businesses craving smarter, tighter integration, what’s the next step in delivering a richer, more immersive experience? That richer, more fully integrated experience comes ab...
Oct. 9, 2015 12:00 AM EDT Reads: 1,130
As-a-service models offer huge opportunities, but also complicate security. It may seem that the easiest way to migrate to a new architectural model is to let others, experts in their field, do the work. This has given rise to many as-a-service models throughout the industry and across the entire technology stack, from software to infrastructure. While this has unlocked huge opportunities to accelerate the deployment of new capabilities or increase economic efficiencies within an organization, i...
Oct. 8, 2015 11:00 PM EDT Reads: 264
SYS-CON Events announced today that Dyn, the worldwide leader in Internet Performance, will exhibit at SYS-CON's 17th International Cloud Expo®, which will take place on November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. Dyn is a cloud-based Internet Performance company. Dyn helps companies monitor, control, and optimize online infrastructure for an exceptional end-user experience. Through a world-class network and unrivaled, objective intelligence into Internet condit...
Oct. 8, 2015 10:00 PM EDT Reads: 592
The last decade was about virtual machines, but the next one is about containers. Containers enable a service to run on any host at any time. Traditional tools are starting to show cracks because they were not designed for this level of application portability. Now is the time to look at new ways to deploy and manage applications at scale. In his session at @DevOpsSummit, Brian “Redbeard” Harrington, a principal architect at CoreOS, will examine how CoreOS helps teams run in production. Attende...
Oct. 8, 2015 09:45 PM EDT Reads: 1,253
Containers are revolutionizing the way we deploy and maintain our infrastructures, but monitoring and troubleshooting in a containerized environment can still be painful and impractical. Understanding even basic resource usage is difficult - let alone tracking network connections or malicious activity. In his session at DevOps Summit, Gianluca Borello, Sr. Software Engineer at Sysdig, will cover the current state of the art for container monitoring and visibility, including pros / cons and li...
Oct. 8, 2015 09:30 PM EDT Reads: 213
Containers are changing the security landscape for software development and deployment. As with any security solutions, security approaches that work for developers, operations personnel and security professionals is a requirement. In his session at @DevOpsSummit, Kevin Gilpin, CTO and Co-Founder of Conjur, will discuss various security considerations for container-based infrastructure and related DevOps workflows.
Oct. 8, 2015 09:15 PM EDT Reads: 227
There are so many tools and techniques for data analytics that even for a data scientist the choices, possible systems, and even the types of data can be daunting. In his session at @ThingsExpo, Chris Harrold, Global CTO for Big Data Solutions for EMC Corporation, will show how to perform a simple, but meaningful analysis of social sentiment data using freely available tools that take only minutes to download and install. Participants will get the download information, scripts, and complete en...
Oct. 8, 2015 09:15 PM EDT Reads: 285
Manufacturing has widely adopted standardized and automated processes to create designs, build them, and maintain them through their life cycle. However, many modern manufacturing systems go beyond mechanized workflows to introduce empowered workers, flexible collaboration, and rapid iteration. Such behaviors also characterize open source software development and are at the heart of DevOps culture, processes, and tooling.
Oct. 8, 2015 09:00 PM EDT Reads: 1,093